GOODS LIFTS WITH SELF-RETAINING STRUCTURE
Powerful and robust but flexible and space-saving.
We can deliver our goods lifts range either with an auxiliary structure for the installation in a load-bearing shaft or with a self-supporting structure for an installation through an opening in the ceiling.
The auxiliary structure allows a quick and flexible installation in existing shafts and is prepared for fire-rated landings doors acc. DIN 18090 or EN 81-58.
The self-supporting structure is available with a 4-sided steel cladding as a complete package from a single source.
All goods lifts are manufactured based on the current machinery directive 2006/42/EC in combination with the harmonized standard EN 81-31. Please find below some information on our goods lifts:
- Capacity 300 -1000 kg;
- Up to 3 entrance sides;
- Travel up to 12 m;
- Single or double hinged shaft doors;
- Motor position at top or beside;
- Nominal speed from 0,1 to 0.3 m/s;
- Safety gear for car;
- Optionally safety gear on tension or balance weights for accessible space below the shaft;
BASIC FEATURES
- Car and shaft doors galvanized
- Self-supporting galvanised construction;
- Motor with compact worm gear
- Plug-and-play microprocessor controls, completely pre-wired, low voltage engineering
- Call and send control including key switch for restricted access
- Call acknowledgement, arrival buzzer and position indicator
- Diagnostic system;
- LED car lighting
- LED shaft lighting
- Documents in more than 20 European Community languages;
OPTIONALLY
-
Structural cladding;
-
Lift design according to the specifics of the load securing;
-
“VVVF” gear;
-
Overload device
-
Different materials and designs acc. to customer‘s demands
-
Internal communication devices;
-
The ships can be fitted with lifts;
-
Protection against water/dust ingress (IP);
-
Special solutions to reduce;
Specifications
| Drive | Car width: | Car depth: | Car height: | Nominal speed: | Suspension | Rated power | ||
| 300 kg | Top or side drive available | 600-1000 mm | 800-1300 mm | 1200-2000 mm | 0.15 m/s single speed | with 2 chains (top drive) or drum/ropes (side drive) |
Max. 1,5 kW (upper) or 3,0 kW |
Other car sizes on request! |
| 500 kg | Top or side drive available | 800-1200 mm | 1100-1500 mm | 1200-2000 mm | 0.15 m/s single speed | with 2 chains (top drive) or drum/ropes (side drive) |
Max. 1,5 kW (upper) or 3,0 kW |
Other car sizes on request! |
| 750 kg | Top or side drive available | 1000-1300 mm | 1300-2000 mm | 1800-2000 mm | 0.10 – 0.15 m/s single speed | with 2 chains (top drive) or drum/ropes (side drive) |
max. 3.0 kW | Other car sizes on request! |
| 1000 kg | Top or side drive available | 1000-1300 mm | 1300-2000 mm | 1800-2000 mm | 0.10 – 0.15 m/s single speed | with 2 chains (top drive) or drum/ropes (side drive) |
max. 3.0 kW | Other car sizes on request! |
| 2000 kg | Top gear | 1000-2000 mm | 1500-2000 mm | 1800-2000 mm | 0,15 m/s WVF | suspension with 2 chains | Max. 5,5 kW | Other car sizes on request! |
